Windsor's housing stock runs the full range. There are older homes with original wiring that has never been touched, newer builds where the panel is sized for the house as it was delivered but not for what the owner has added since, and commercial units where tenant changes have left the electrical in a patchwork state. The job looks different depending on which of those you are standing in, and the first step in any of them is understanding what the existing wiring and panel can actually handle before anything new gets added to it.
We work across all of it. Homeowners dealing with a dead outlet or a breaker that will not stay reset, landlords getting a rental ready between tenants, businesses that need a panel sized for new equipment rather than what the last occupant left behind. Whatever the situation, the scope gets worked out on the call, the price is confirmed before anything is scheduled, and the visit goes from there. That is how we handle electrical work throughout Windsor and the surrounding area.
A house in Windsor that has been there for several decades may be running on wiring that was never designed for the loads a modern household puts through it. Knob-and-tube wiring, where it is still present, has no ground conductor and no tolerance for the kind of circuit additions that happen naturally over time. Aluminum branch-circuit wiring from the 1960s and 1970s is a different problem: it expands and contracts differently from the devices it connects to, and connections that were fine at installation can loosen over years of use. Neither of these is a cosmetic issue. Both affect how safely the home operates day to day.
Troubleshooting in an older home takes longer because the wiring path is not always documented and not always where you expect it. We work through the circuit from both ends, check protective devices, and give you a clear picture of what the system actually looks like before recommending any repair or replacement.
A newer home starts with a panel sized for the original design. Add an EV charger, a home office, a hot tub, or a major kitchen renovation, and the load calculation changes. Breakers that trip under normal use, lights that dim when a large appliance starts, and a panel with no open slots for new circuits are all signs that the service is being asked to do more than it was sized for. A load calculation on the call helps confirm whether a circuit addition, a subpanel, or a full service upgrade is the right answer.
In a multi-unit building, the panel for an individual unit is sometimes inside the unit and sometimes in a common corridor or utility room. Either way, the circuit work inside the unit is our scope. What is shared between units, including the building's main service and common-area wiring, is typically the building owner's or property manager's responsibility, and anything on that side of the meter usually requires coordination with them before work starts.
If you are a tenant and something inside your unit has stopped working, the first question is whether the fault is inside your space or upstream of it. A GFCI outlet tripped somewhere else on the circuit, a breaker in the building's main panel, or a fault in the shared wiring are all possibilities. We can work through the diagnosis and tell you clearly where the fault sits and whose scope it falls under. If it is yours to fix, we fix it. If it is the building's, you will have that answer in plain terms to take back to whoever manages the property.
The price for electrical work depends on three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without additional work. A straightforward outlet replacement in a wall with accessible wiring is a different job from the same outlet in a finished wall where the circuit traces back to a panel that is already at capacity.
We do not give vague ranges and then revise them on arrival. When you call, we ask about the symptom, the property type, and what you are trying to accomplish. From that conversation we give you a price that covers the work as described. If something unexpected turns up once the work starts, we tell you before continuing, not after. The price is confirmed before the visit is scheduled, and the scope is explained in plain terms.
Some jobs also involve permit considerations. Whether a permit is required depends on the nature of the work and where the property sits. We work through that on the call and confirm what applies before anything is scheduled.
Electrical work on a renovation or an addition has to happen in the right order relative to everyone else on the job. Rough-in wiring needs to go in before the walls are closed. If the framing is not ready, the electrician cannot run wire. If the electrician has not finished rough-in before the drywall crew arrives, the walls get closed over incomplete wiring, which means opening them again later.
The same applies at the finish stage. Lighting fixtures, outlets, switches, and panel connections all happen after the walls are finished and painted. Getting the electrician scheduled at the wrong phase of a project does not just delay that trade. It delays everyone who comes after.
We coordinate directly with whoever is managing the project. If you are the homeowner running your own renovation, we work through the sequence with you on the call and confirm when the electrical phases need to happen relative to the rest of the work. If a general contractor is involved, we work to their schedule. The goal is to not be the trade that holds up the next one.
Recessed lighting comes up most often when a ceiling is being opened for a renovation, because that is the practical window to run the wiring without tearing into a finished surface. LED retrofit work is a different situation: replacing an existing fixture with an LED version usually does not require opening the ceiling, but dimmer compatibility and driver load are worth checking before the fixture goes in. Both are common requests, and both start with a look at what the existing circuit can carry.
Running a supply to a detached structure means a circuit from the main panel out to the building, sized for what will run there. A garage used for light storage needs a different circuit than one set up as a workshop with power tools. An electric gate has its own load and its own wiring requirements. We size the circuit for what the structure actually needs, not for the minimum that will technically work.
Outdoor outlets in Windsor need weatherproof covers and GFCI protection. A standard indoor outlet exposed to weather is a fault waiting to happen. We install weatherproof enclosures rated for outdoor use, position them where they are actually useful, and make sure the circuit feeding them has the protection the location requires.
Connecting a generator to the home's electrical system requires a transfer switch. The transfer switch is what isolates the home from the utility grid when the generator is running, which is not optional. Running a generator without one puts utility workers at risk and can damage the generator when grid power returns. We wire the transfer switch, connect the generator hookup, and confirm the circuits the generator will carry are correctly sized for the load.
A panel-level surge protector intercepts voltage spikes before they reach the wiring and devices throughout the building. In this region, where public-safety power shutoffs and the surges that can follow grid restoration are a documented concern, a whole-home surge protector is a practical installation rather than an optional one. It works with the grounding and bonding system already in place and requires no changes to the rest of the wiring.
When a problem will not keep, describe what you are seeing when you call and we work through how quickly it needs to be handled. A burning smell, a panel that is warm to the touch, or a situation where a circuit cannot be safely de-energized are all urgent. We are available every day from 8:00 AM to 10:00 PM.
For planned work, the visit is confirmed on the call. You know the scope, the price, and the time before we hang up. If the property is a rental or a business that needs to stay open, we work through access and timing on the call so the visit does not disrupt what is happening there. You're talking to someone who knows the area and the homes in it, so the questions you get back are the ones that actually help scope the job.
We cover Windsor and the nearby communities of Larkfield-Wikiup, Fulton, Forestville, Healdsburg, and Graton. Properties throughout this part of Sonoma County are in our service area. If you are not sure whether your address is covered, ask when you call and we will confirm. If none of that quite fits, the page that lists our electrical services covers the wider range.
Often, yes. If the wiring is mostly sound and only specific circuits or areas are problematic, targeted repairs or partial rewiring can address the issues without touching the whole property. We assess what the wiring actually looks like and recommend only what the situation calls for.
Whether a permit is required depends on the nature of the work and the specific property. Running a new circuit to a detached structure is the kind of job that often involves permitting, but the requirements vary depending on the scope and the jurisdiction. We work through that on the call and confirm what applies before anything is scheduled, so you are not left to figure it out on your own.
Loose connections at outlets and junction boxes are common in homes that have not had electrical work in many years, and they are often the cause of outlets that feel warm or lights that flicker without an obvious reason. Wiring that was extended or modified without documentation is another pattern, and it shows up when a circuit behaves differently than the panel suggests it should. A diagnostic visit works through the circuit from both ends to find where the fault actually sits.
Start by checking whether the fault is inside your unit or upstream of it. A tripped GFCI outlet somewhere else on the circuit, or a breaker in the building's main panel, can cut power to part of your unit without anything being wrong with your wiring. If the building's shared electrical is involved, that is the property manager's scope.
If the fault is inside your unit, call us at (707) 289-5336 and we will work through it from there.
We schedule commercial kitchen work around the hours the kitchen is not in use wherever possible. When work has to happen during operating hours, we coordinate with the operator to minimize disruption and confirm in advance which circuits will be affected and for how long.
It depends on the work. Replacing an outlet or a switch on a single circuit means only that circuit is de-energized. Panel work typically means the whole property loses power for the duration of that phase. We walk through what to expect when we scope the job on the call.
We work through what we found in order of risk. Active faults, wiring that poses a fire or shock hazard, and panel conditions that affect the whole system come first. Older wiring that is still functional but should be updated in time comes after. We explain the reasoning so you can make an informed decision about what to address and when.
It depends on the job. Replacing an outlet or a switch is clean work with minimal disruption. Running new wiring through existing walls involves cutting and patching, which creates more dust and debris. We discuss what to expect for the specific job on the call.
You do not need to know what is wrong before you call. Describing the symptom is enough. Whether it is a breaker that keeps tripping, a room that lost power, or an outdoor circuit that stopped working after wet weather, we work through the diagnosis from what you tell us.
Call (707) 289-5336, available every day from 8:00 AM to 10:00 PM.
We handle electrical work across Windsor and the surrounding area.
Call (707) 289-5336 and describe what you are seeing.
Electrical work in the surrounding towns: Sebastopol, Rohnert Park, Cotati, Novato.
Check our complete list of towns.
Below is a plain-language look at the electrical work we handle in Windsor and the surrounding Sonoma County area. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job on your list is not here, call us and we will talk through what it involves.
| Service Type | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit installation for additions and garages, Electrical rough-in for remodels, Junction box and conduit work, Grounding and bonding | Home additions, garage buildouts, and remodels with open walls | Open walls during a remodel are the right time to address wiring that would otherwise need to be accessed later. We scope the full circuit before the walls close. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Panel replacement and breaker upgrades, Subpanel installation, Load calculations and utility coordination | Older homes adding major appliances, EV chargers, or additional circuits | Panel upgrades in Windsor often involve service-entrance work coordinated with the utility. Load calculations are done before anything is scheduled. |
| EV Charger Installation | Level 2 charger wiring and circuit, 240-volt dedicated circuit installation, Panel capacity check and load calculation, Conduit routing and outlet placement | EV owners in the North Bay adding home charging | The price depends on the panel's current capacity and how far the circuit needs to run. You get the number on the call before anything is scheduled. |
Call (707) 289-5336 to talk through the job, get a price, and schedule the visit. We are available every day from 8:00 AM to 10:00 PM.
(707) 289-5336